PAMC 8.10.050 covers the removal of protected status trees. Allowable reasons for removal and the process required will be determined by the specific situation. Details on the most common situations are itemized below.
Protected Tree Removal in the Absence of Development (residential)
If a protected status tree must be removed from a residential property in the absence of development a Tree Permit is required. Tree Permits are issued by the Urban Forestry Section. The following are the allowable reasons for removal in this situation:
- The tree is dead, is hazardous, or constitutes a nuisance under PAMC 8.04.050
- The tree is a detriment to or is crowding an adjacent protected tree
- The tree is impacting the foundation or eaves of a residence or any covered parking required under PAMC Title 18
To apply for a Tree Permit, simply fill out and email the Tree Permit application along with an arborist report (see Report Requirements tab on this page) confirming one or more of the above allowable reasons for removal.
Protected Tree Removal in the Absence of Development (non single family residential)
If a protected status tree must be removed from a commercial, industrial, or multi unit residential property in the absence of development, a Staff Level Architectural Review for Tree Removal is required. Architectural Reviews for Tree Removal are issued by the Planning & Development Department. The following are the allowable reasons for removal in this situation:
- The tree is dead, is hazardous, or constitutes a nuisance under PAMC 8.04.050
- The tree is a detriment to or is crowding an adjacent protected tree
- The tree is impacting the foundation or eaves of a residence (structure) or any covered parking required under PAMC Title 18
To apply for an Architectural Review for Tree Removal, contact the Planning & Development Department.
Protected Tree Removal as Part of Development (residential)
If a protected status tree must be removed from a residential property as part of a development project, in most cases no separate Tree Permit is required. Approval of the development project serves as approval for the proposed tree removal. Urban Forestry Section staff will review the development application for compliance with the Tree Protection Ordinance and all applicable tree related policies. Notification requirements may still apply. The following are the allowable reasons for removal in this situation:
- The tree is dead, is hazardous, or constitutes a nuisance under PAMC 8.04.050
- The tree is a detriment to or is crowding an adjacent protected tree
- The tree is impacting the foundation or eaves of a residence or any covered parking required under PAMC Title 18
- The tree is so close to the proposed development that construction would result in the death of the tree, and there is no financially feasible design alternative that would permit preservation of the tree, where financially feasible means an alternative that preserves the tree unless retaining the tree would increase project cost by more than twice the reproduction cost of the tree or ten percent of the given project valuation, whichever is greater.
Protected Tree Removal as Part of Development Involving a Subdivision of Land
If a protected status tree must be removed from a property as part of a development project that includes a subdivision of land, in most cases no separate Tree Permit is required. Approval of the development project serves as approval for the proposed tree removal. Urban Forestry Section staff will review the development application for compliance with the Tree Protection Ordinance and all applicable tree related policies. Notification requirements may still apply. The following are the allowable reasons for removal in this situation:
- The tree is dead, is hazardous, or constitutes a nuisance under PAMC 8.04.050
- Removal is unavoidable due to restricted access to the property or deemed necessary to repair a geologic hazard (landslide, repairs, etc.), in which case only the protected tree or trees necessary to allow access to the property or repair the geologic hazard may be removed.
Protected Tree Removal as Part of Development Requiring Planning Approval
If a protected status tree must be removed from a property as part of a development project that requires planning approval (excluding residential projects or projects including a subdivision), in most cases no separate Tree Permit is required. Urban Forestry Section staff will review the development application for compliance with the Tree Protection Ordinance and all applicable tree related policies. Approval of the development project serves as approval for the proposed tree removal. If the applicant wishes to remove a protected tree between the planning approval phase and issuance of a building permit, a Tree Permit may be required. Notification requirements may still apply. The following are the allowable reasons for removal in this situation:
- The tree should be removed because it is dead, hazardous, or constitutes a nuisance under Section 8.04.050. In such cases, the dripline area of the removed tree, or an equivalent area on the site, shall be preserved for mitigation purposes from development of any structure.
- Retention of the tree would result in reduction of the otherwise-permissible buildable area of the lot by more than twenty-five percent, and there is no financially feasible design alternative that would permit preservation of the tree, where financially feasible means an alternative that preserves the tree unless retaining the tree would increase project cost by more than twice the reproduction cost of the tree or ten percent of the given project valuation, whichever is greater.